TEG10W stove top TEG Generator

TEG10W stove top TEG Generator

199.00 USD

For More Details

TEG10W stove top TEG Generatorpdf

SKU: teg10w -stove-top Categories: ,

Product Description

The TEG10W stove top TEG Generator is a small convenient lightweight generator, weighting only (3.6 lbs.) 1.5 Kg. The units nominal power output is 10 watts. The connector output comes with a USB Cell phone charger 5V and a secondary Terminal for 1.2V to 20V Current driven safe charging. Placed on a direct heat source for best results or a very hot woodstoves for indoor lighting and powering for any 5VDC or 12VDC load. Better results occur if the unit is direct placed on a flame source as more heat is absorbed into the hot plate and direct into and thru the modules. ALWAYS PLACE ON WOODSTOVE AFTER IT IS HOT SO, YOU SHOCK THE HOT SIDE AND CREATE A RAPID DELTA TEMPERATURE. IF YOU DO NOT THE HEAT WILL TRANSFER SLOWLY TO BOTH HOT & COLD SIDE ELIMINATING ANY DT. As well make sure the fan is running for at least 5 minutes. Failure to do this will cause the fan to stop if load is engaged too soon.

TEG10W-Specification-and-instructions-for-use-Flat-plate

The TEG10W stove top TEG Generator is a small convenient lightweight generator, weighting only (4.3 lbs.) 2 Kg. The units nominal power output is 10 watts. The connector output comes with a standard 12VDC car lighter adapter as well as a USB connector rated 5 VDC @ 500 ma for charging any standard mobile phone or rechargeable battery pack.

Removing the base plate allows the TEG to be placed on woodstoves for indoor lighting and powering any 12VDC load. ALWAYS PLACE ON WOODSTOVE AFTER IT IS HOT SO, YOU SHOCK THE HOT SIDE AND CREATE A RAPID DELTA TEMPERATURE. IF YOU DO NOT THE HEAT WILL TRANSFER SLOWLY TO BOTH HOT & COLD SIDE ELIMINATING ANY DT.

Translate »