WHALEFIN4-40mm LIQUID SINK
Feature: WHALEFIN4-40mm LIQUID SINK
- All Aluminum construction
- ½” ID 5/8” OD barbed fittings for both in port & out port.
- Mate to a ½” ID silicon tube for best results with 3/16” wall thickness.(recommended)
- Low flow low pressure drop design.
- Flow rates 1.5 to 2 liters per minute with slight back pressure
- Optimal flow rate is 1.8 liters per minute.
- All flow is in parallel NO serial flow.
TRIPLE DECKER DESIGN BELOW
Populated with 4 pieces of 40 x 40mm recommended modules or 8 pieces Triple Decker design:
Any of the below Part numbers can be used:
TEG1-12610-5.1 TEG1-4199-5.3 TEG1-12610-4.3 TEG1-07025HT-SS TEG1B-12610-5.1
Special order: TEG1-PB-07010-6.0